Posted on Category:Home Improvement

Planning and Estimating Fence Installation

Fence installation is a great way to add privacy and security to your yard. It can also increase the value of your home. Whether you’re installing a fence yourself or hiring a professional, there are a few things to keep in mind.

First, you need to determine your property line. This will help you decide where to set your posts and what size panels to use. To do this, hire a surveyor or take a plat of survey from your local land records office to get a clear idea of the area around your home.

Once you have your property lines, it’s time to begin planning and estimating the cost of your fence project. This includes materials, labor, and other expenses such as the labor to bury your fence posts.

The cost of a fence will vary greatly depending on the material used, the type and style of fence, as well as its length and the terrain. For example, a fence that runs up a hill might need to be built higher than a flat-ground fence.

Your fence’s design should be consistent with the rest of your yard. This can make it easier to install. It can also make your yard more inviting and attractive, as well as create an overall cohesive look for your property.

You will want to consider your neighbors when designing and building your fence, as it may obstruct their views or cause them inconvenience. This is especially true if your fence is on an adjoining lot, so talk to them about their ideas and opinions.

As you plan your fence, be sure to check with your neighborhood zoning department and homeowners association for any restrictions on fencing. They can help you avoid fines and other issues that might impact the future value of your home.

Before you start laying out the perimeter of your fence, it’s important to mark the corners with stakes. Next, measure the distance between each pair of corners with a tape measure and add it up. Then, divide the total length by the number of fence panels you’ll need to make sure your yard is properly fenced.

If you’re going to add a gate, this will require even more planning as it will affect the length of each panel and post needed. Ideally, you’ll need two fence posts for each side of the gate, and two posts for each end of the gate.

Once you have all of your fence components, you can begin assembling it. The first step is to secure the top rail of your fence in place. This rail is generally a loop cap that goes through the middle of each line post, but you can also attach it to a section of fence panels and toe nail them to the posts.

Then, you can add pickets to each end of the rails, forming the actual fence. You can also run a third rail down the center of the fence for taller fences that need more strength. If you need fence installer in Houston visit